Limestone Wireless Charger 122465
25Description: Trendy 5W wireless charger with limestone casing and a non-slip cork base. For convenient wireless charging, simply plug it into any USB port or mains adapter and place a compatible device on the charging pad.
The charger will work with most modern devices and is presented in kraft packaging with Natura branding. Instructions are included.
Due to the nature of the natural limestone material, there can be slight unavoidable variances in the texture and finishing of the Limestone casing.
Colour: Charcoal.
Dimensions:
- Charger: L 100mm × W 100mm × 13mm.
- Gift box: L 135mm × W 132mm × 32mm.
Specifications:
- Charging position: flat
- Input power: DC 5V/2A
- Output power: DC 5V/1A
- Input cable: 100cm
- Wireless output: 5W
- Charging pads: 1
- Max. induction distance: 2–6mm
- Frequency: 110–205KHz
- Indicator: single LED
Materials:
- Charging surface: limestone
- Base: cork
- Gift box: kraft cardboard
Packaging: Individual gift box.
Notes: Wireless charging will work at the optimum power level when used with a 5V/2.4A mains adaptor. Using a PC/laptop USB output may lead to slow charging, or not charging at all. Positioning on the charging surface and the material/thickness of the phone case may also impact wireless charging.
Price: from AUD $14.32 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Specific Colour Print 40mm × 40mm or 55mm × 20mm.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
-
Laser Engraving 80mm × 80mm.×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Charcoal | 0 | - |
Leadtime: Click here to see when you are likely to get your order.
