Flex Wireless Fast Charging Stand
124858
50
Description: Multi-function 15W wireless phone charger which can be used as a compact horizontal charger, or poised as a vertical or horizontal wireless charging stand. It features a natural bamboo panel and is compatible with devices that are enabled for wireless charging (most modern phones), offering fast charging capability for compatible devices.
Simply plug it into any USB port or a mains adapter and place a compatible device on it for convenient wireless charging. Flex is presented in a printed natural gift box with an instruction leaflet and a Type-C USB cable.
Bamboo is a natural material which produces unavoidable variances in the grain pattern, colour and branding.
Colour: Natural/White
Dimensions:
- Charging stand: W 83mm × H 83mm × 21mm (compact)
- Gift box: W 103mm × H 123mm × 23mm
Packaging: Individual gift box
Notes: Fast charging will work at the optimum power level when used with a 20W or more QC (Quick Charge) or PD (Power Delivery) mains adaptor. Using a PC/laptop USB output may lead to slow charging, or not charging at all. Positioning on the charging surface and the material/thickness of the phone case may also impact wireless charging.
Price: from AUD $14.38 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Specific Colour Print 65mm × 35mm or 50mm × 50mm×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
-
Laser Engraving 65mm × 35mm or 50mm × 50mm×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Full Colour Print (Direct Digital) 70mm × 50mm×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Natural/White | 160 | Mid Feb 2025 |
Leadtime: Click here to see when you are likely to get your order.
