Bamboo 5W Wireless Charger
116765
25
Description: Wireless 5W phone charger with a trendy natural bamboo finish and a non-marking base. It will charge devices that are enabled for wireless charging and will work with most modern phones. Simply plug it into any USB port or a mains adapter and place a compatible device on it for convenient wireless charging.
Presented in a black gift box with a Micro-B USB cable and an instruction leaflet.
Bamboo is a natural material which produces unavoidable variances in the grain pattern, colour and branding.
Colour: Natural/Black.
Dimensions: Diameter 99mm × H 9mm.
Specifications:
- Charging position: flat
- Input power: DC 5V/1.5A
- Output power: DC 5V/1A
- Input cable: Micro-B, 80cm
- Wireless output: 5W
- Charging pads: 1
- Max induction distance: 4mm
- Frequency: 110–205KHz
- Indicator: single LED
Materials:
- Charging surface: bamboo
- Base: Acrylonitrile Butadiene Styrene (ABS)
- Gift box: cardboard
Packaging: Gift box.
Notes: Some phone cases may affect the wireless charging connection. The wireless charger will work at the optimum power level when used with a 5V/2.4A mains adaptor. Using a PC/laptop USB output to power the wireless charger may lead to slow charging, or not charging at all. Other factors like positioning on the charging surface and the type of case used may also impact wireless charging.
Price: from AUD $10.55 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Specific Colour Print 55mm circle or 60mm × 35mm.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
-
Full Colour Print (Direct Digital) 85mm circle.×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
Laser Engraving 60cm circle or 65mm × 35mm.×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Natural/Black | 2150 | Mid Feb 2025 |
Leadtime: Click here to see when you are likely to get your order.
