Swivel USB Flash Drive LL9600

Choose Branding/Decoration:

• Laser Engraving   Top: 27mm × 14mm.

  ×

  

  Laser Engraving

  Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.

  Advantages

  • Higher perceived value than other forms of branding.
  • The branding becomes part of the surface and is permanent.
  • Gives a similar finish to etching on glassware at a much lower cost.
  • Can mark curved or uneven products.
  • Can produce variable data including individual names.
  • The product can be shipped as soon as marking is finished.

  Limitations

  • The size of branding areas is limited on curved surfaces.
  • Fine detail can be lost on smaller products like pens.

  Artwork Requirements

  • Artwork should be supplied in vector format.
• Full Colour Print (Digital)   Top: 27mm × 14mm.

  ×

  

  Digital Print

  This production method is used for printing media such as paper, vinyl and magnetic material used in the manufacture of labels, badges and fridge magnets, etc.

  Advantages

  • Ideal for producing vivid full colour images as well as spot colour branding.
  • Can print variable data including individual names.
  • Only one set up charge is required irrespective of the number of print colours.
  • Can be cut to special shapes.
  • The branding can bleed off the edges of the product.

  Limitations

  • Only approximate PMS colours can be reproduced.
  • Metallic gold and silver colours are not available.

  Artwork Requirements

  • Artwork can be supplied in either vector or bitmap format.
  • Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
• Full Colour Print (Digital)   Backing card: 148.5mm × 105mm or 100mm × 75mm (minimum 100)

  ×

  

  Digital Print

  This production method is used for printing media such as paper, vinyl and magnetic material used in the manufacture of labels, badges and fridge magnets, etc.

  Advantages

  • Ideal for producing vivid full colour images as well as spot colour branding.
  • Can print variable data including individual names.
  • Only one set up charge is required irrespective of the number of print colours.
  • Can be cut to special shapes.
  • The branding can bleed off the edges of the product.

  Limitations

  • Only approximate PMS colours can be reproduced.
  • Metallic gold and silver colours are not available.

  Artwork Requirements

  • Artwork can be supplied in either vector or bitmap format.
  • Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
• Personalisation   Please also select either Laser Engraving or Full Colour Print (Digital) (with ID Label)

  ×

  

  Personalisation

  Personalisation provides the ability to individually name each product, so creating a unique, personalised gift.

  Advantages

  • Instant connection with the product.
  • Can add numbers as well as names, etc.

  Limitations

  • Not all products can be personalised as it depends on the branding method(s) available.
  • Text only.
  • Multiple lines of text may incur extra costs.

  Artwork Requirements

  • List of names
  • Font required (if any)