Megatron Power Bank
115541
25
Description: Compact 2200mAh power bank with a smart aluminium finish. Can be recharged in 4–5 hours from a USB port or a mains adapter. Comprehensive instructions and a Micro-B USB cable are included.
An optional EVA carry case and a triple connector cable are available on request.
Megatron laser engraves to an oxidised white colour.
Colours:
- Power bank: Silver, Black.
- Carry case: Black.
Dimensions:
- Power bank: L 94 mm × W 22 mm × 21 mm.
- Carry case: L 105mm × W 56mm × 42mm.
Packaging: Individual boxes or an optional carry case.
Specifications:
- Outer case: Aluminium
- Battery: Lithium-ion
- Capacity: 2200mAh
- Battery life: 500 charges (approximately)
- Input: 5V/500mA
- Output: 5V/1A
- Charging time: 4–5 hours
Price: from AUD $8.27 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Power Bank
Select Colour
-
Laser Engraving Power bank: 85mm × 15mm.×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
(Positions)- 1
- 2
- 3
- 4
-
Full Colour Print (Direct Digital) Power bank: 85mm × 15mm.×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
(Positions)- 1
- 2
- 3
- 4
-
-
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Silver | 980 | - |
| Black | 1950 | - |
| Mini Carry Case - Black | 2050 | - |
| Triple Connector Cable | 6200 | Early Jan 2025 |
Leadtime: Click here to see when you are likely to get your order.
