Bolt 22.5W QC Power Bank
124864
10
Description: High performance 20,000mAh power bank with a lithium-polymer battery that delivers up to 22.5W QC (fast charging) and 18W PD charge capability. Bolt is capable of charging up to three devices simultaneously and features a digital power gauge to show the power percentage remaining.
The power bank has Micro-B and Type-C inputs with a Type-C and two USB-A outputs.
This impressive power bank is presented in a printed black gift box.
Colour: Black
Dimensions:
- Powerbank: L 146mm × W 65mm × 27mm
- Gift box: L 170mm × W 70mm × 33mm
Packaging: Individual gift box
Price: from AUD $43.13 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
- Direct Digital: Artwork must be supplied in vector format
- Battery Capacity: 20
- Battery Type: Rechargeable Lithium
- Input 1: Micro
- Input 2: Type
- Output 1: USB
- Output 2: USB
- Output 3: Type
- On/Off Mechanism: Power Button
- Battery Indicator: Digital Numeric Display
- Charge Time (via Mains Adaptor): Approx. 5.5 hours
- Input Cable: Type
- Note: Quick Charge (QC) and Power Delivery (PD) fast charging is available only with compatible devices
- Country Of Origin: China
- Casing: Aluminium
- Trim: Acrylonitrile Butadiene Styrene (ABS)
-
Laser Engraving Front: 110mm × 45mm×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Laser Engraving Back: 110mm × 45mm×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Full Colour Print (Direct Digital) Front: 110mm × 45mm×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
Full Colour Print (Direct Digital) Back: 110mm × 45mm×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
-
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Black | 1750 | - |
| Triple Connector Cable | 9500 | - |
| Extra Large Carry Case - Black | 1050 | - |
Leadtime: Click here to see when you are likely to get your order.
