Arya Powerbank
LL9215
25
Description: Slim design 5,000mAh Power Bank with built in Type C and combo Android/IOS connector cables for charging practically any phone/device as well any device with a Micro USB input. Arya has graduated LED indicators that show the charge level.
This powerbank can be charged up to 300 times (takes 4–5 hours to fully charge) and comes with a 12 month limited technology warranty.
Colour: White
Dimensions: W 66mm × L 115mm × 10mm
Specifications:
- Material: ABS Shell
- Battery capacity: 5,000 mAh
- Output: 5V⎓2A (10W) USB Type-A
- Output cable: 5V⎓2A (10W) USB Type-C, 8 Pin/Micro USB combo (non-removable)
- Input: 5V⎓2A (10W) USB Type-C
Packaging: Bubble Bag inside individual kraft box
Price: from AUD $12.69 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Full Colour Print (Direct Digital) 70mm × 40mm×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
Specific Colour Print 60mm × 50mm×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| White | 1850 | - |
Leadtime: Click here to see when you are likely to get your order.
