Choose Branding/Decoration:

• Laser Engraving   Top panel (large): 100mm × 25mm

  ×

  

  Laser Engraving

  Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.

  Advantages

  • Higher perceived value than other forms of branding.
  • The branding becomes part of the surface and is permanent.
  • Gives a similar finish to etching on glassware at a much lower cost.
  • Can mark curved or uneven products.
  • Can produce variable data including individual names.
  • The product can be shipped as soon as marking is finished.

  Limitations

  • The size of branding areas is limited on curved surfaces.
  • Fine detail can be lost on smaller products like pens.

  Artwork Requirements

  • Artwork should be supplied in vector format.
• Laser Engraving   Clear back panel (small): 50mm × 50mm

  ×

  

  Laser Engraving

  Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.

  Advantages

  • Higher perceived value than other forms of branding.
  • The branding becomes part of the surface and is permanent.
  • Gives a similar finish to etching on glassware at a much lower cost.
  • Can mark curved or uneven products.
  • Can produce variable data including individual names.
  • The product can be shipped as soon as marking is finished.

  Limitations

  • The size of branding areas is limited on curved surfaces.
  • Fine detail can be lost on smaller products like pens.

  Artwork Requirements

  • Artwork should be supplied in vector format.
• Laser Engraving   Clear back panel (large): 80mm × 80mm

  ×

  

  Laser Engraving

  Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.

  Advantages

  • Higher perceived value than other forms of branding.
  • The branding becomes part of the surface and is permanent.
  • Gives a similar finish to etching on glassware at a much lower cost.
  • Can mark curved or uneven products.
  • Can produce variable data including individual names.
  • The product can be shipped as soon as marking is finished.

  Limitations

  • The size of branding areas is limited on curved surfaces.
  • Fine detail can be lost on smaller products like pens.

  Artwork Requirements

  • Artwork should be supplied in vector format.
• Full Colour Print (Direct Digital)   50mm diameter

  ×

  

  Direct Digital

  Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.

  Advantages

  • Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
  • Can print variable data including individual names.
  • Only one set up charge is required irrespective of the number of print colours.
  • Instant drying so products can be shipped immediately.
  • Offers larger print areas on many products and can print very close to the edge of flat products.

  Limitations

  • Only approximate PMS colours can be reproduced.
  • Some colours cannot be reproduced including metallic silver and gold.
  • The size of branding areas is limited on curved surfaces.
  • Larger print areas tend to be more expensive.

  Artwork Requirements

  • Artwork can be supplied in either vector or bitmap format.
  • Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
• Full Colour Print (Digital)   Box sleeve: 392.4mm × 116.4mm

  ×

  

  Digital Print

  This production method is used for printing media such as paper, vinyl and magnetic material used in the manufacture of labels, badges and fridge magnets, etc.

  Advantages

  • Ideal for producing vivid full colour images as well as spot colour branding.
  • Can print variable data including individual names.
  • Only one set up charge is required irrespective of the number of print colours.
  • Can be cut to special shapes.
  • The branding can bleed off the edges of the product.

  Limitations

  • Only approximate PMS colours can be reproduced.
  • Metallic gold and silver colours are not available.

  Artwork Requirements

  • Artwork can be supplied in either vector or bitmap format.
  • Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
• Individual names/numbers   Please also choose Direct Digital, Box sleeve or Laser Engraving

  ×

  

  Individual names/numbers

  Individual names/numbers provides the ability to individualise a product with a person’s name or number, so creating a unique, personalised gift.

  Advantages

  • Instant connection with the product.
  • Can add numbers as well as names, etc.

  Limitations

  • Not all products can be personalised as it depends on the branding method(s) available.
  • Text only.
  • Multiple lines of text may incur extra costs.

  Artwork Requirements

  • List of names/numbers
  • Font required (if any)