Beatcore Bluetooth Speaker
125539
25
Description: Premium water-resistant Bluetooth speaker with a hard-wearing design, perfect for outdoor use. Beatcore has two 6W speaker outputs, and music can be played for up to five hours via Bluetooth, AUX or Micro-SD card.
The speaker has music, volume and hands-free controls and a built-in light display at either end of the speaker showcases the two branding areas.
The speaker recharges in three hours and is presented in a printed black gift box with instructions and a charging cable.
Colour: Black
Dimensions:
- Speaker: Diameter 79mm × H 169mm
- Gift box: H 175mm × 85mm × 85mm
Specifications:
- Sound Output: 6W x 2
- Water resistant classification: IPX6
- Battery capacity: 1800mAh
- Bluetooth version: 5.0
Packaging: Individual gift box
Price: from AUD $36.19 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Specific Colour Print Top/bottom: 35mm circle×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
(Positions)- 1
- 2
-
Full Colour Print (Direct Digital) Top/bottom: 39mm circle×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
(Positions)- 1
- 2
-
Full Colour Print (Resin Coated Finish) Top/bottom: 39mm circle×
Resin Coated Finish
Resin coated finish is produced by printing the artwork onto a vinyl material with strong adhesive on the reverse. The branded area is coated with a crystal clear resin which is allowed to dry. Once dry, the finished decal is applied to the product and the adhesive forms a permanent bond.
Advantages
- Ideal for producing vivid full colour images as well as spot colour branding.
- Produces a stunning 3D effect that elevates the perceived value of a product.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Branding can bleed off the resin coated area.
Limitations
- Only approximate PMS colours can be reproduced.
- The resin requires a one day curing period before the product can be shipped.
- Metallic gold and silver colours are not available.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
(Positions)- 1
- 2
-
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Speaker Black | 0 | Early Feb 2025 |
| Speaker Plate (Pair) | 1150 | Late Apr 2025 |
Leadtime: Click here to see when you are likely to get your order.
