Aruba Hooded Towel
121979
5
Description: Convenient hooded towel made of 320gsm, 100% cotton. With a fringe trim and kangaroo pocket, this towel is both absorbent and stylish. It has side snaps, terry on the inside, and a flat weave on the outside.
Colours: Grey, White, Navy, Black.
Dimensions: One size fits most people.
- Length: 1000mm
- Width: 800mm
Packaging: Loose packed.
Price: from AUD $29.75 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Select Colour
-
Full Colour Print (Colourflex Transfer) Front: 200mm × 250mm.×
Colourflex Transfer
Colourflex transfers are used for branding fabrics and are printed on transfer paper using a digital printing machine then heat pressed onto the product.
Advantages
- Cost effective method for producing spot colour or full colour transfers.
- Crisp, clear artwork reproduction is possible even on textured fabrics.
- Has a matt finish and will not crack or fade under normal circumstances.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- A thin, clear line of glue can sometimes be seen around the edges of the image.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
-
Full Colour Print (Colourflex Transfer) Front: 180mm × 130mm.×
Colourflex Transfer
Colourflex transfers are used for branding fabrics and are printed on transfer paper using a digital printing machine then heat pressed onto the product.
Advantages
- Cost effective method for producing spot colour or full colour transfers.
- Crisp, clear artwork reproduction is possible even on textured fabrics.
- Has a matt finish and will not crack or fade under normal circumstances.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- A thin, clear line of glue can sometimes be seen around the edges of the image.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
-
Full Colour Print (Colourflex Transfer) Back: 250mm × 200mm.×
Colourflex Transfer
Colourflex transfers are used for branding fabrics and are printed on transfer paper using a digital printing machine then heat pressed onto the product.
Advantages
- Cost effective method for producing spot colour or full colour transfers.
- Crisp, clear artwork reproduction is possible even on textured fabrics.
- Has a matt finish and will not crack or fade under normal circumstances.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- A thin, clear line of glue can sometimes be seen around the edges of the image.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
-
Embroidery (up to 10,000 stitches) 140mm × 120mm.×
Embroidery
Embroidery is an excellent way of branding bags, apparel and other textile products. It offers higher perceived value and a depth of branding quality which other processes can’t match and the finished image has a slightly raised effect. Embroidery uses rayon thread which is stitched into the product.
Advantages
- Only one setup charge applies per position for up to 12 thread colours.
Limitations
- Only approximate PMS colour matches are possible—the threads to be used are chosen from those available to give the closest possible match. See our thread colour chart for the colours available.
- It is best to avoid both fine detail and font sizes which are less than 4mm high in the artwork.
- Individual naming not available.
Artwork Requirements
- Vector artwork is preferred.
-
Embroidery (additional stitches) (per 5000).×
Embroidery
Embroidery is an excellent way of branding bags, apparel and other textile products. It offers higher perceived value and a depth of branding quality which other processes can’t match and the finished image has a slightly raised effect. Embroidery uses rayon thread which is stitched into the product.
Advantages
- Only one setup charge applies per position for up to 12 thread colours.
Limitations
- Only approximate PMS colour matches are possible—the threads to be used are chosen from those available to give the closest possible match. See our thread colour chart for the colours available.
- It is best to avoid both fine detail and font sizes which are less than 4mm high in the artwork.
- Individual naming not available.
Artwork Requirements
- Vector artwork is preferred.
(Positions)- 1
- 2
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Grey | 1600 | - |
| White | 300 | - |
| Navy | 630 | - |
| Black | 400 | - |
Leadtime: Click here to see when you are likely to get your order.
