Inca Pen
116301
250
Description: Retractable ballpoint pen with a natural cork barrel and a soft-touch grip. It has a black refill with 1000 metres of German manufactured Dokumental ink.
Colour: Natural/Black.
Dimensions: Diameter 10mm × L 140mm × 11mm (includes clip).
Specifications:
- Writing distance: 1000m
- Refill type: Ball
- Laser engrave finish: Natural etch
- Refill colour: Black
- Mechanism: Retractable
- Barrel finish: Natural
- Trim: Black
Materials:
- Barrel: Cork
- Grip: Cork
- Clip: Acrylonitrile Butadiene Styrene (ABS)
- Tip: Acrylonitrile Butadiene Styrene (ABS)
- Ball: Tungsten carbide
- End cap: Acrylonitrile Butadiene Styrene (ABS)
Packaging: Loose packed or an optional black presentation box or sleeve.
Price: from AUD $0.48 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Laser Engraving Positions D & E: 60mm × 7mm (natural etch finish).×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
(Positions)- 1
- 2
-
Full Colour Print (Direct Digital) Positions D & E: 60mm × 7mm.×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
(Positions)- 1
- 2
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Natural/Black Pen | 7900 | Early Feb 2025 |
| Cardboard Pen Sleeve - Natural | 4050 | - |
| Cardboard Pen Sleeve - White | 9900 | - |
| Cardboard Pen Sleeve - Black | 7000 | - |
Leadtime: Click here to see when you are likely to get your order.
