Oval Metal Key Ring
105659
100
Description: Oval metal key ring with a plated shiny chrome finish which is nicely presented in a black gift box. It can be branded on the front with a resin coated finish or both the front and the back can be laser engraved to a natural etch.
Colour: Shiny Chrome.
Dimensions: W 31mm × L 50mm × 5mm (ring diameter: 34mm).
Packaging: Gift box.
Price: from AUD $2.37 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Laser Engraving 18mm × 23mm (oval).×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Full Colour Print (Resin Coated Finish) 22.5mm × 27.5mm oval (plus bleed if required).×
Resin Coated Finish
Resin coated finish is produced by printing the artwork onto a vinyl material with strong adhesive on the reverse. The branded area is coated with a crystal clear resin which is allowed to dry. Once dry, the finished decal is applied to the product and the adhesive forms a permanent bond.
Advantages
- Ideal for producing vivid full colour images as well as spot colour branding.
- Produces a stunning 3D effect that elevates the perceived value of a product.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Branding can bleed off the resin coated area.
Limitations
- Only approximate PMS colours can be reproduced.
- The resin requires a one day curing period before the product can be shipped.
- Metallic gold and silver colours are not available.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Chrome | 0 | - |
Leadtime: Click here to see when you are likely to get your order.