Chevron Bottle Opener Key Ring
107106
250
Description: Metal bottle opener with a key ring which can be branded with the choice of a resin coated finish or oxidised white laser engraving.
Colours: Matt Silver, Matt Red, Matt Green, Matt Blue, Matt Black.
Dimensions: W 40mm × 65mm × 3mm (ring diameter: 25mm).
Packaging: Loose packed.
Price: from AUD $1.30 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Select Colour
-
Laser Engraving 25mm circle (front and back).×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
(Positions)- 1
- 2
-
Full Colour Print (Resin Coated Finish) 28.5mm circle plus bleed if required.×
Resin Coated Finish
Resin coated finish is produced by printing the artwork onto a vinyl material with strong adhesive on the reverse. The branded area is coated with a crystal clear resin which is allowed to dry. Once dry, the finished decal is applied to the product and the adhesive forms a permanent bond.
Advantages
- Ideal for producing vivid full colour images as well as spot colour branding.
- Produces a stunning 3D effect that elevates the perceived value of a product.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Branding can bleed off the resin coated area.
Limitations
- Only approximate PMS colours can be reproduced.
- The resin requires a one day curing period before the product can be shipped.
- Metallic gold and silver colours are not available.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Matt Silver | 4150 | - |
| Matt Red | 6600 | - |
| Matt Green | 5200 | - |
| Matt Blue | 7100 | Mid Mar |
| Matt Black | 3700 | Mid Mar |
Leadtime: Click here to see when you are likely to get your order.
