Description: Kyoto Gift Set features the eco-friendly Napier Bamboo Pen and a 4GB Swivel Bamboo Flash Drive. This set combines sustainability with style, perfect for environmentally conscious professionals.
Presented in a sleek black two-piece cardboard gift box with a laser-cut foam insert for secure placement, it exudes elegance and practicality.
Colour: Black/Bamboo
Dimensions: 170mm × 80mm × 32mm (LxWxH)
Materials:
- Bamboo Flash Drive
- Bamboo Pen
- Cardboard box
- Foam: 2 pieces of 10mm.
Packaging: Packed in a two-piece black cardboard gift box
Price:
from
AUD $13.27
unbranded (if available).
See your price—use the price calculator below.
Printing template
(PDF file):
-
Laser Engraving
Pen: 50mm × 6mm
×

Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Specific Colour Print
Pen: 50mm × 7mm
×

Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Full Colour Print (Direct Digital)
Pen: 50mm × 7mm
×

Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
Laser Engraving
Flash drive: 25mm × 11mm
×

Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Specific Colour Print
Flash drive: 25mm × 11mm
×

Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Full Colour Print (Direct Digital)
Flash drive: 35mm × 11mm
×

Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
Specific Colour Print
Box: 60mm × 60mm (one colour)
×

Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Full Colour Print (Digital Print)
Box sleeve: 231.1mm × 168mm
×

Digital Print
This production method is used for printing media such as paper, vinyl and magnetic material used in the manufacture of labels, badges and fridge magnets, etc.
Advantages
- Ideal for producing vivid full colour images as well as spot colour branding.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Can be cut to special shapes.
- The branding can bleed off the edges of the product.
Limitations
- Only approximate PMS colours can be reproduced.
- Metallic gold and silver colours are not available.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
Personalisation
Please also choose either Laser Engraving, Direct Digital or Box sleeve print
×
Personalisation
Sorry, but we do not appear to have any more Personalisation information.
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
Item |
Quantity in stock |
Next Shipment |
Flash Drive | 3058 | - |
Pen | 3270 | Mid May |
Gift Box | 1770 | - |
Foam Insert 10mm | 17083.17 | - |
Last Updated 2025-04-24 10:14 pm
×
Leadtimes
Approximate Delivery Dates for Branded products…
…assuming artwork approval and payment receipt is tomorrow (or the next working day), and that product is in-stock. These are estimates only, and may vary at peak times, so check with us if your deadline is crucial.
We also have an express freight service to metropolitan locations at an additional cost. Please ask us about this, if required.
| NSW | QLD | Vic |
SA | Tas | WA | NT |
Metro |
13th May–15th May |
14th May–15th May |
15th May |
18th May |
20th May |
20th May |
20th May |
Outer Metro |
14th May |
15th May–18th May |
18th May |
18th May |
20th May |
21st May |
20th May |
Regional |
18th May |
19th May |
18th May |
19th May |
20th May |
25th May |
21st May |
Country |
18th May |
20th May |
18th May |
19th May |
20th May |
25th May |
28th May |
Approximate Delivery Dates for Unbranded products, i.e., no artwork is on products…
…assuming payment receipt is tomorrow (or the nxt working day), and that product is in-stock. These are estimates only, and may vary at peak times, so check with us if your deadline is crucial.
| NSW | QLD | Vic |
SA | Tas | WA | NT |
Metro |
29th Apr–1st May |
30th Apr–1st May |
1st May |
2nd May |
6th May |
6th May |
6th May |
Outer Metro |
30th Apr |
1st May–2nd May |
2nd May |
2nd May |
6th May |
7th May |
6th May |
Regional |
2nd May |
5th May |
2nd May |
5th May |
6th May |
9th May |
7th May |
Country |
2nd May |
6th May |
2nd May |
5th May |
6th May |
9th May |
14th May |
If you need freight to New Zealand, please order from PrimoProducts New Zealand www.primoproducts.co.nz.
Leadtime: Click here to see when you are likely to get your order.
Other products like this:
People who bought this also bought: