Choose Branding/Decoration:

• Specific Colour Print   40mm × 60mm.

  ×

  

  Pad Print

  Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.

  Advantages

  • Ideal for printing on curved or uneven products.
  • Close PMS matches are possible on white or light coloured products.
  • Metallic gold and silver is available.

  Limitations

  • Halftones cannot be consistently reproduced.
  • The size of branding areas is limited on curved surfaces.
  • Unable to print variable data.
  • Close PMS matches are more difficult on darker products and will only be approximate.
  • Minor print distortion may occur on uneven or curved surfaces.
  • Pad print inks require a curing period before the product can be shipped.
  • A set up charge is required for each colour to be printed.

  Artwork Requirements

  • Artwork should be supplied in vector format.

  (Colours)

  • 1
  • 2
  • 3
  • 4

  0

  (Positions)

  • 1
  • 2

  0
• Screen Print   180mm × 150mm (one colour).

  ×

  

  Screen Print

  Screen printing is achieved by forcing ink through a fine mesh screen with a squeegee onto the product and is ideal for branding flat or cylindrical objects.

  Advantages

  • Large print areas are possible on both flat and cylindrical products.
  • Close PMS matches are possible on white or light coloured products.
  • Ideal for large solid areas of colour.
  • Most screen print inks are quick drying and can be shipped immediately after printing.
  • Metallic gold and silver is available.

  Limitations

  • Halftones and very fine lines are not recommended.
  • Close PMS matches are more difficult on darker products and will only be approximate.
  • Unable to print variable data.
  • A set up charge is required for each colour to be printed.

  Artwork Requirements

  • Artwork should be supplied in vector format.
• Laser Engraving   50mm × 90mm.

  ×

  

  Laser Engraving

  Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.

  Advantages

  • Higher perceived value than other forms of branding.
  • The branding becomes part of the surface and is permanent.
  • Gives a similar finish to etching on glassware at a much lower cost.
  • Can mark curved or uneven products.
  • Can produce variable data including individual names.
  • The product can be shipped as soon as marking is finished.

  Limitations

  • The size of branding areas is limited on curved surfaces.
  • Fine detail can be lost on smaller products like pens.

  Artwork Requirements

  • Artwork should be supplied in vector format.

  (Positions)

  • 1
  • 2

  0
• Full Colour Print (Rotary Digital)   190mm × 160mm

  ×

  

  Rotary Digital Print

  Direct to product rotary digital printing involves the transfer of UV ink and a varnish coating from inkjet print heads and can be used to produce detailed gloss artwork using both closely matched spot colours and full colour branding.

  Advantages

  • Ideal for large or complex full colour gloss prints.
  • The print is dry and ready to ship as soon as the product is printed.
  • Only one setup charge is required regardless of the number of print colours.
  • No loss of print vibrancy, even on darker products.

  Limitations

  • Production speed is limited so lead times can be longer in some cases.
  • Some colours cannot be reproduced including metallic and neon/fluorescent colours.
  • As the print does not wrap completely around the product, there is a small gap between the start and end of the print.
  • More expensive than other branding options.

  Artwork Requirements

  • Artwork can be supplied in either vector or bitmap format.
  • Bitmaps supplied ideally 300dpi resolution at the actual print size.
  • Fonts are advised to be converted to outlines/objects to avoid font conflicts.
• Gift Tube (Large)  

  ×

  Gift Tube (Large)

  Sorry, but we do not appear to have any more Gift Tube (Large) information.
• Specific Colour Print   Gift tube: 50mm circle (tube or top of lid)—one colour.

  ×

  

  Pad Print

  Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.

  Advantages

  • Ideal for printing on curved or uneven products.
  • Close PMS matches are possible on white or light coloured products.
  • Metallic gold and silver is available.

  Limitations

  • Halftones cannot be consistently reproduced.
  • The size of branding areas is limited on curved surfaces.
  • Unable to print variable data.
  • Close PMS matches are more difficult on darker products and will only be approximate.
  • Minor print distortion may occur on uneven or curved surfaces.
  • Pad print inks require a curing period before the product can be shipped.
  • A set up charge is required for each colour to be printed.

  Artwork Requirements

  • Artwork should be supplied in vector format.

  0

  (Positions)

  • 1
  • 2
  • 3

  0
• Individual names/numbers (per line)   Please also choose Laser Engraving

  ×

  

  Individual names/numbers

  Individual names/numbers provides the ability to individualise a product with a person’s name or number, so creating a unique, personalised gift.

  Advantages

  • Instant connection with the product.
  • Can add numbers as well as names, etc.

  Limitations

  • Not all products can be personalised as it depends on the branding method(s) available.
  • Text only.
  • Multiple lines of text may incur extra costs.

  Artwork Requirements

  • List of names/numbers
  • Font required (if any)