Manta Vacuum Cup
LL0853
50
Description: Double walled, stainless steel vacuum cup (400mL) with push button open/close feature in the lid. It will keep drinks hot or cold for hours.
Not suitable for carbonated liquids or for freezing.
For logo longevity handwashing is recommended.
Materials: 304 grade stainless steel & 201 grade outer stainless steel
Colours: Silver, White, Black.
Dimensions: Diameter 80mm × H 193mm.
Packaging: Individual unsealed polybag inside individual kraft tuck box.
Price: from AUD $11.45 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Select Colour
-
Laser Engraving Top: 35mm × 30mm.×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Laser Engraving Lower: 32mm × 80mm.×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Specific Colour Print Top: 45mm × 25mm (one colour).×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Specific Colour Print Lower: 30mm × 60mm (one colour).×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Full Colour (Digital Print) Top: 35mm × 30mm.×
Digital Print
This production method is used for printing media such as paper, vinyl and magnetic material used in the manufacture of labels, badges and fridge magnets, etc.
Advantages
- Ideal for producing vivid full colour images as well as spot colour branding.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Can be cut to special shapes.
- The branding can bleed off the edges of the product.
Limitations
- Only approximate PMS colours can be reproduced.
- Metallic gold and silver colours are not available.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
(Positions)- 1
- 2
-
Full Colour (Digital Print) Sleeve on box: see template.×
Digital Print
This production method is used for printing media such as paper, vinyl and magnetic material used in the manufacture of labels, badges and fridge magnets, etc.
Advantages
- Ideal for producing vivid full colour images as well as spot colour branding.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Can be cut to special shapes.
- The branding can bleed off the edges of the product.
Limitations
- Only approximate PMS colours can be reproduced.
- Metallic gold and silver colours are not available.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
Full Colour (Rotary Digital Print) Top: 251.33mm × 164mm.×
Digital Print
This production method is used for printing media such as paper, vinyl and magnetic material used in the manufacture of labels, badges and fridge magnets, etc.
Advantages
- Ideal for producing vivid full colour images as well as spot colour branding.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Can be cut to special shapes.
- The branding can bleed off the edges of the product.
Limitations
- Only approximate PMS colours can be reproduced.
- Metallic gold and silver colours are not available.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
Full Colour (Rotary Digital Print—Gloss) Top: 251.33mm × 164mm.×
Digital Print
This production method is used for printing media such as paper, vinyl and magnetic material used in the manufacture of labels, badges and fridge magnets, etc.
Advantages
- Ideal for producing vivid full colour images as well as spot colour branding.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Can be cut to special shapes.
- The branding can bleed off the edges of the product.
Limitations
- Only approximate PMS colours can be reproduced.
- Metallic gold and silver colours are not available.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
Full Colour (Rotary Digital Print—Metallic) Top: 251.33mm × 164mm (Silver bottle only)×
Digital Print
This production method is used for printing media such as paper, vinyl and magnetic material used in the manufacture of labels, badges and fridge magnets, etc.
Advantages
- Ideal for producing vivid full colour images as well as spot colour branding.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Can be cut to special shapes.
- The branding can bleed off the edges of the product.
Limitations
- Only approximate PMS colours can be reproduced.
- Metallic gold and silver colours are not available.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Black | 2682 | - |
| White | 2196 | - |
| Silver | 1316 | - |
Leadtime: Click here to see when you are likely to get your order.