Evora Vacuum Cup
121404
25
Description: Premium 360mL double wall, vacuum insulated stainless steel (BPA-free) coffee cup that will keep drinks hot or cold for hours. It has a transparent push-on, slider lid.
Evora laser engraves to a shiny steel finish and an optional natural gift box is available on request.
This product is not dishwasher safe and handwashing is recommended.
Colours: White, Translucent Blue, Black.
Dimensions: Diameter 87mm × H 130mm.
Materials:
- Cup: 201 stainless steel outer, 304 stainless steel inner
- Lid: Acrylonitrile Styrene (AS) and a silicone seal
Packaging: Loose packed or optional gift box.
Price: from AUD $9.23 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
- Capacity: 360ml
- Insulation: Double
- Lid Attachment: Push On
- Lid Style: Slider Lid
- Finish: Coloured Cups
- Gift Box (Optional) Colour: Natural
- BPA Free: Yes
- Hot Liquid Suitable: Yes
- Engraving Finish: Shiny Steel
- Wash Instructions: Hand Wash Recommended
- Dishwasher safe: No
- Country of Origin: China
- Cup: 201 Stainless Steel Outer
- : 304 Stainless Steel Inner
- Lid: Acrylonitrile Styrene (AS) and a Silicone Seal
-
Select Colour
-
Specific Colour Print 30mm × 50mm or 40mm circle.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
(Positions)- 1
- 2
-
Laser Engraving 60mm × 55mm × 50mm. (Blue and Black cups only).×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
(Positions)- 1
- 2
-
Full Colour Print (Rotary Digital) 238mm × 100mm×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
-
-
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| White (Printing only) | 2950 | Mid Jun |
| Translucent Blue | 4750 | Mid Mar |
| Black | 3500 | Mid Jun |
| Natural Box | 5400 | Early May |
Leadtime: Click here to see when you are likely to get your order.
