Choose Branding/Decoration:

• Specific Colour Print   Top: 45mm × 15mm.

  ×

  

  Pad Print

  Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.

  Advantages

  • Ideal for printing on curved or uneven products.
  • Close PMS matches are possible on white or light coloured products.
  • Metallic gold and silver is available.

  Limitations

  • Halftones cannot be consistently reproduced.
  • The size of branding areas is limited on curved surfaces.
  • Unable to print variable data.
  • Close PMS matches are more difficult on darker products and will only be approximate.
  • Minor print distortion may occur on uneven or curved surfaces.
  • Pad print inks require a curing period before the product can be shipped.
  • A set up charge is required for each colour to be printed.

  Artwork Requirements

  • Artwork should be supplied in vector format.

  (Colours)

  • 1
  • 2
  • 3
  • 4

  0

  0
• Specific Colour Print   Lid: 16mm × 25mm.

  ×

  

  Pad Print

  Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.

  Advantages

  • Ideal for printing on curved or uneven products.
  • Close PMS matches are possible on white or light coloured products.
  • Metallic gold and silver is available.

  Limitations

  • Halftones cannot be consistently reproduced.
  • The size of branding areas is limited on curved surfaces.
  • Unable to print variable data.
  • Close PMS matches are more difficult on darker products and will only be approximate.
  • Minor print distortion may occur on uneven or curved surfaces.
  • Pad print inks require a curing period before the product can be shipped.
  • A set up charge is required for each colour to be printed.

  Artwork Requirements

  • Artwork should be supplied in vector format.

  (Colours)

  • 1
  • 2
  • 3
  • 4

  0

  0
• Specific Colour Print   Band: 40mm × 15mm.

  ×

  

  Pad Print

  Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.

  Advantages

  • Ideal for printing on curved or uneven products.
  • Close PMS matches are possible on white or light coloured products.
  • Metallic gold and silver is available.

  Limitations

  • Halftones cannot be consistently reproduced.
  • The size of branding areas is limited on curved surfaces.
  • Unable to print variable data.
  • Close PMS matches are more difficult on darker products and will only be approximate.
  • Minor print distortion may occur on uneven or curved surfaces.
  • Pad print inks require a curing period before the product can be shipped.
  • A set up charge is required for each colour to be printed.

  Artwork Requirements

  • Artwork should be supplied in vector format.

  (Colours)

  • 1
  • 2
  • 3
  • 4

  0

  0
• Laser Engraving   Band: 30mm × 15mm.

  ×

  

  Laser Engraving

  Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.

  Advantages

  • Higher perceived value than other forms of branding.
  • The branding becomes part of the surface and is permanent.
  • Gives a similar finish to etching on glassware at a much lower cost.
  • Can mark curved or uneven products.
  • Can produce variable data including individual names.
  • The product can be shipped as soon as marking is finished.

  Limitations

  • The size of branding areas is limited on curved surfaces.
  • Fine detail can be lost on smaller products like pens.

  Artwork Requirements

  • Artwork should be supplied in vector format.

  (Positions)

  • 1
  • 2

  0
• Additional colour combinations   (after 5)

  ×

  Additional colour combinations

  Sorry, but we do not appear to have any more Additional colour combinations information.

  (Positions)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

  0
• Gift Box (Optional)  

  ×

  Gift Box (Optional)

  Sorry, but we do not appear to have any more Gift Box (Optional) information.
• Full Colour Print (Digital Packaging)   Gift Box: 65mm × 110mm (no white). Please also choose Gift Box.

  ×

  Full Colour Print (Digital Packaging)

  Sorry, but we do not appear to have any more Full Colour Print (Digital Packaging) information.
• Full Colour Print (Gift Box Sleeve)   Please refer to template. Please also choose Gift Box.

  ×

  Full Colour Print (Gift Box Sleeve)

  Sorry, but we do not appear to have any more Full Colour Print (Gift Box Sleeve) information.
• Individual names/numbers (per line)   Please also choose Digital Packaging Print, Laser Engraving, or Gift Box Sleeve.

  ×

  

  Individual names/numbers

  Individual names/numbers provides the ability to individualise a product with a person’s name or number, so creating a unique, personalised gift.

  Advantages

  • Instant connection with the product.
  • Can add numbers as well as names, etc.

  Limitations

  • Not all products can be personalised as it depends on the branding method(s) available.
  • Text only.
  • Multiple lines of text may incur extra costs.

  Artwork Requirements

  • List of names/numbers
  • Font required (if any)