Eden Glass Bottle (Natural Sleeve)
124747
50
Description: Stylish 600mL borosilicate glass bottle with a fashionable and insulating poly jute sleeve. Borosilicate is lightweight, exceptionally strong and is shatter-resistant.
Eden is presented in a gift box or an optional gift tube.
Bamboo can produce unavoidable variances in the grain pattern and colour.
Colours: Clear/Natural.
Dimensions:
- Bottle: Diameter 70mm × H 238mm.
- Gift box: W 75mm × L 75mm × H 248mm.
- Gift tube (optional): Diameter 78mm × H 259mm.
Specifications:
- Capacity: 600mL
- BPA free: Yes
- Wash instructions: hand wash recommended
- Dishwasher safe: No
- Gift box: included
- Optional packaging: gift tube
- Suitable for carbonated or hot liquids: No
Materials:
- Bottle: borosilicate glass
- Lid: bamboo outer, polypropylene (PP) inner and a silicone seal
- Sleeve: neoprene, polyester jute
Packaging: Individual box or optional gift tube.
Price: from AUD $7.00 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Screen Print Sleeve: 60mm × 90mm (3 colour maximum).×
Screen Print
Screen printing is achieved by forcing ink through a fine mesh screen with a squeegee onto the product and is ideal for branding flat or cylindrical objects.
Advantages
- Large print areas are possible on both flat and cylindrical products.
- Close PMS matches are possible on white or light coloured products.
- Ideal for large solid areas of colour.
- Most screen print inks are quick drying and can be shipped immediately after printing.
- Metallic gold and silver is available.
Limitations
- Halftones and very fine lines are not recommended.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Unable to print variable data.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
(Positions)- 1
- 2
-
Laser Engraving Lid: 30mm × 10mm or 35mm × 15mm.×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
(Positions)- 1
- 2
- 3
-
Full Colour Print (Colourflex Transfer) Sleeve: 70mm × 100mm.×
Colourflex Transfer
Colourflex transfers are used for branding fabrics and are printed on transfer paper using a digital printing machine then heat pressed onto the product.
Advantages
- Cost effective method for producing spot colour or full colour transfers.
- Crisp, clear artwork reproduction is possible even on textured fabrics.
- Has a matt finish and will not crack or fade under normal circumstances.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- A thin, clear line of glue can sometimes be seen around the edges of the image.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
(Positions)- 1
- 2
-
-
Specific Colour Print Gift tube: 50mm circle (tube or top of lid, one colour).×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Positions)- 1
- 2
- 3
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Clear Bottle | 8400 | Late Jan 2025 |
| Natural Lid | 2800 | Early Feb 2025 |
| Natural Sleeve | 880 | - |
| Natural Gift Tube | 1800 | - |
| Black Gift Tube | 3300 | - |
Leadtime: Click here to see when you are likely to get your order.
