Ottawa Cooler Bag
123086
10
Description: Quality 20L cooler bag made of durable 600D polyester material with water-resistant zippers to keep the contents of the bag dry and protected. A velco hatch in the lid allows for easy access to the inside of the bag without opening it fully.
The bag has thick PE foam insulation encased in a water-resistant PEVA inner liner and features an adjustable shoulder strap, a slip pocket and two side pockets, and carry handles with a velcro cuff.
Colour: Charcoal Heather.
Dimensions: H 270mm × W 325mm × gusset 220mm (excludes handle and strap). Handle length: 568mm. Strap length (extended): 1245mm.
Specifications:
- Top flap: 10 × 10cm
- Front slip pocket width: 31cm
- Zip: coil
- Capacity: 20L
- Wash label: yes
- Side pocket height: 23cm
- Side pocket width: 20cm
Materials:
- Body: polyester
- Lining: PEVA (polyethylene-vinyl acetate)
- Insulation: PE (polyethylene)
- Zip: PU (polyurethane)
Packaging: Loose packed.
Price: from AUD $27.63 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Screen Print 170mm × 110mm.×
Screen Print
Screen printing is achieved by forcing ink through a fine mesh screen with a squeegee onto the product and is ideal for branding flat or cylindrical objects.
Advantages
- Large print areas are possible on both flat and cylindrical products.
- Close PMS matches are possible on white or light coloured products.
- Ideal for large solid areas of colour.
- Most screen print inks are quick drying and can be shipped immediately after printing.
- Metallic gold and silver is available.
Limitations
- Halftones and very fine lines are not recommended.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Unable to print variable data.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
-
Full Colour Print (Colourflex Transfer) 170mm × 110mm.×
Colourflex Transfer
Colourflex transfers are used for branding fabrics and are printed on transfer paper using a digital printing machine then heat pressed onto the product.
Advantages
- Cost effective method for producing spot colour or full colour transfers.
- Crisp, clear artwork reproduction is possible even on textured fabrics.
- Has a matt finish and will not crack or fade under normal circumstances.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- A thin, clear line of glue can sometimes be seen around the edges of the image.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
-
Embroidery (up to 10,000 stitches) 100mm × 60mm.×
Embroidery
Embroidery is an excellent way of branding bags, apparel and other textile products. It offers higher perceived value and a depth of branding quality which other processes can’t match and the finished image has a slightly raised effect. Embroidery uses rayon thread which is stitched into the product.
Advantages
- Only one setup charge applies per position for up to 12 thread colours.
Limitations
- Only approximate PMS colour matches are possible—the threads to be used are chosen from those available to give the closest possible match. See our thread colour chart for the colours available.
- It is best to avoid both fine detail and font sizes which are less than 4mm high in the artwork.
- Individual naming not available.
Artwork Requirements
- Vector artwork is preferred.
-
Embroidery (additional stitches) (per 5000).×
Embroidery
Embroidery is an excellent way of branding bags, apparel and other textile products. It offers higher perceived value and a depth of branding quality which other processes can’t match and the finished image has a slightly raised effect. Embroidery uses rayon thread which is stitched into the product.
Advantages
- Only one setup charge applies per position for up to 12 thread colours.
Limitations
- Only approximate PMS colour matches are possible—the threads to be used are chosen from those available to give the closest possible match. See our thread colour chart for the colours available.
- It is best to avoid both fine detail and font sizes which are less than 4mm high in the artwork.
- Individual naming not available.
Artwork Requirements
- Vector artwork is preferred.
(Positions)- 1
- 2
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Heather Charcoal | 0 | Early Feb 2025 |
Leadtime: Click here to see when you are likely to get your order.