Venice Glass Coaster Set of 2 (Square) 116394
100Description: Set of two square glass coasters in an elegant black gift box with a window to show off the brand. The coasters have four soft non-skid, non-marking polyurethane pads on the base. Handwashing is recommended.
Colour: Clear.
Dimensions:
- Coaster: W 90mm × L 90mm × 4mm.
- Gift Box: W 92mm L 92mm × 15mm.
Packaging: Gift box.
Price: from AUD $2.58 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Specific Colour Print 55mm × 55mm (per set).×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
-
Imitation Etch 55mm × 55mm (per set).×
Imitation Etch
Imitation etch is a special pad printing ink used for producing an etch like effect on glass products.
Advantages
- Much lower cost than real etching.
- Can brand curved or uneven products.
- Produces a subtle, high perceived value finish that looks like etching.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Minor print distortion may occur on uneven or curved surfaces.
- Requires a curing period before the product can be shipped.
- Unable to print variable data.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Laser Engraving 55mm × 55mm (per set).×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Coaster - Clear (Pad/Engraving/Imitation) | 640 | Late Aug |
| Black Box (2) | 2400 | Mid Oct |
Leadtime: Click here to see when you are likely to get your order.
